 | United States. Department of State - Congresses and conventions - 1929 - 982 pages
...at a distance from the forward perpendicular which is not greater than the permissible length. (3) A main transverse bulkhead may be recessed provided...inboard of vertical surfaces on both sides of the ship, situated at a distance from the shell plating equal to one-fifth the breadth of the ship, as... | |
 | United States. Shipping Board - Lifesaving - 1929 - 90 pages
...on the damaged side (p. 41, p. 35, p. 43, Reg. V, par. 7) . Steps and Recesses in Bulkheads. 44. A main transverse bulkhead may be recessed provided...inboard of vertical surfaces on both sides of the ship situated at a distance from the shell plating equal to one-fifth of the breadth of the ship (see... | |
 | Administrative law - 1939 - 1192 pages
...the forward perpendicular which is not greater than the permissible length. (c) Recessed bulkheads. A main transverse bulkhead may be recessed provided...at the level of the deepest subdivision load line. Any part of a recess which lies outside these limits shall be dealt with as a step in accordance with... | |
 | United States - Ships - 1943 - 266 pages
...at a distance from the forward perpendicular which is not greater thau the permissible length. (3) A main transverse bulkhead may be recessed provided...inboard of vertical surfaces on both sides of the ship, situated at a distance from the shell plating equal to one-fifth of the breadth of the ship,... | |
 | Administrative law - 1980 - 278 pages
...corresponding to a margin line taken 3 inches below the step. § 73.10-45 Recessed bulkheads. (a) A main transverse bulkhead may be recessed provided...one-fifth the breadth of the vessel, as defined in § 73.05-4, and at right angles to the centerline at the level of the deepest subdivision load line.... | |
 | Administrative law - 1953 - 1392 pages
...corresponding to a margin line taken 3 inches below the step. § 73.10-45 Recessed bulkheads, (a) A main transverse bulkhead may be recessed provided...one-fifth the breadth of the vessel, as defined in § 73.05-4, and at right angles to the center line at the level of the deepest subdivision load line.... | |
 | Administrative law - 1974 - 204 pages
...1.060 1.002 .044 .885 .826 .7fi6 .706 .645 .625 Chapter I — Coast Guard, Dept. of Transportation both sides of the vessel, situated at a distance from...one-fifth the breadth of the vessel, as defined in § 73.05-4, and at right angles to the centerline at the level of the deepest subdivision load Une.... | |
 | Administrative law - 1975 - 224 pages
....174 470 117 480 . . .060 490 .002 600 . .944 510 .885 620 .828 530 .768 640 .706 660 ... . . B45 626 both sides of the vessel, situated at a distance from...plating equal to one-fifth the breadth of the vessel, as denned in § 73.05-4, and at right angles to the centerline at the level of the deepest subdivision... | |
 | Administrative law - 1976 - 216 pages
...corresponding to a margin line taken 3 inches below the step. § 73.10-45 Recessed bulkheads. (a) A main transverse bulkhead may be recessed provided...of the recess lie inboard of vertical surfaces on LI "X" 430 _ ... 440 . - 450 .... ..... ... 460 470 480 490 . . ............ 600 . . 610 — . —... | |
 | Administrative law - 1970 - 652 pages
...corresponding to a margin line taken 3 inches below the step. § 73.10-45 Recessed bulkheads. (a) A main transverse bulkhead may be recessed provided...situated at a distance from the shell plating equal to one-flfth the breadth of the vessel, as defined in § 73.05-4, and at right angles to the centerllne... | |
| |
A main transverse bulkhead may be recessed provided that all parts of the recess lie inboard of vertical surfaces on both sides of the ship, situated at a distance from the shell plating equal to onefifth the breadth of the ship... 
