GB/T 3954-2014 Translated English of Chinese Standard (GBT 3954-2014, GB/T3954-2014, GBT3954-2014): Aluminum and aluminum alloys rod for electrical purposeThis Standard specifies the requirements, test methods, inspection rules, marks, packaging, storage, quality certificate and purchase order (or contract) of aluminum and aluminum alloys rod for electrical purpose. This Standard is applicable to continuous casting and rolling electric aluminum and aluminum alloys rod for electrical purpose of drawn wire, cable conductive wire with round aluminum wire, aluminum wire and other electrical aluminum conductor. |
Contents
| 3 | |
Scope | 4 |
Requirements | 5 |
Test methods | 8 |
Inspection rules | 9 |
Marks packaging transport and storage | 11 |
Purchase order or contract content | 12 |
Annex A Informative Comparison on product model | 13 |
Annex B Informative Comparison on resistivity and conductivity | 14 |
Common terms and phrases
0.10 Allowance 8A07 aluminum alloy alloy rod heat alloys rod GB/T aluminum alloys GB/T aluminum alloys rod aluminum and aluminum Aluminum Industry Aluminum Industry Co aluminum wire Appearance quality batch number Big roll inspection carried out according chemical composition Comparison on product designation of 8A07 determined as unqualified deviation and non-roundness diameter is 9.5 electrical properties electrical purpose extract 1 sample extract double samples Head or tail inspection by rolls inspection results insulation material designation Mechanical properties nominal diameter 0.8 Numerical value rounding order or contract packaging product model product’s name provisions of GB/T provisions of Table purchase order purchaser and indicated purchaser’s purpose shall comply Qualified delivery quality certificate rod for electrical rod heat resistance rolls for small rounding and determination sample to repeat small roll inspection special requirements Standard strength residual rate supplier supplier’s name tail sampling technical supervision department tensile strength residual Test methods typical diameters unqualified sample